North and Central India · Seismic Zone III

TMT Steel Bar Suppliers in Kanpur

Metal Ministry Inc holds every commercial grade of TMT reinforcement for Kanpur — Fe 500 through Fe 600 and corrosion resistant bar — with mill test certificates, verified weight and delivery scheduled around your pour programme.

Call +91 98921 71042 WhatsApp your BBS

72 HoursLead time 5 MTMinimum order 12,000 MTMonthly capacity

TMT bar bundles in stock for Kanpur — Ready stock, Ghaziabad stock point

Grades in stock

Every grade, held for Kanpur

Pick the grade you have been specified. Each page carries the full specification, the size and weight chart and the local delivery position.

Fe 500 in Kanpur 500 MPa · 12.0% elong. Fe 500D in Kanpur 500 MPa · 16.0% elong. Fe 550D in Kanpur 550 MPa · 14.5% elong.

Local supply

Supplying Kanpur

Office and retail construction dominates here, which means larger pours, longer bars and a strong preference for a single supplier who can hold rate across a multi-month programme.

Consolidated NCR despatch.

Active work in this belt includes Kanpur Metro, Panki industrial area. If your site is on any of these, we have almost certainly delivered to the road outside it.

in the steel trade: 25 years
monthly despatch capacity: 12,000 MT
builder and developer sites supplied: 2,400+
cash discount on 100% advance: 1%

How TMT is made

Four stages, in order

The sequence is what gives the bar a hard surface and a ductile core. Skip a stage and you get a bar that either snaps or bends.

STAGE 01

Hot rolling

Billets are rolled down to the finished diameter at around 1,000 °C and leave the last stand still glowing.

STAGE 02

Quenching

The bar passes through a high-pressure water jacket. The outer skin hardens into martensite in a fraction of a second while the core stays hot.

STAGE 03

Self-tempering

Heat trapped in the core flows back outward and tempers that hardened rim into tough tempered martensite.

STAGE 04

Atmospheric cooling

On the cooling bed the core transforms slowly into ductile ferrite and pearlite. Hard outside, soft inside — that is the whole trick.

Questions

Buying TMT in Kanpur

Which TMT grade should I use in Kanpur?

Kanpur is in Seismic Zone III. Fe 500D is the safe default for framed structures, Fe 550D where the design is optimised for steel saving, and CRS if the site is close to the sea. Send us the structural drawings and we will tell you what the BOQ actually needs.

How fast can you deliver to Kanpur?

72 hours from Ghaziabad stock point. Consolidated NCR despatch.

Do you supply mill test certificates in Kanpur?

Yes, with every despatch, and the heat number matches the bundle tag.

Can you deliver mixed diameters in one load?

Yes. Most of our loads are mixed. Tell us the schedule and we build the trailer to it.

Do you accept barter against flats or units?

Yes, from developers. Fifty per cent of the order is settled in cash and fifty per cent against ready units carrying an occupancy certificate, valued at 25 to 30 per cent below the prevailing market rate for that project, subject to title due diligence.

What happens if the material is rejected on site?

If your structural consultant rejects a consignment on test results, we lift it from site and replace it with fresh material at our cost. No restocking charge and no argument.

What is rolling margin and why does it matter?

Rolling margin is the permitted variation between the theoretical and actual weight of a bar. IS 1786 allows up to 8% on small diameters. A supplier working at the loose end of that tolerance is quietly delivering less steel than your bar bending schedule assumed.