Maharashtra · Seismic Zone III

TMT Steel Bar Suppliers in Thane

Metal Ministry Inc holds every commercial grade of TMT reinforcement for Thane — Fe 500 through Fe 600 and corrosion resistant bar — with mill test certificates, verified weight and delivery scheduled around your pour programme.

Call +91 98921 71042 WhatsApp your BBS

Same DayLead time 5 MTMinimum order 12,000 MTMonthly capacity

TMT bar bundles in stock for Thane — Ready stock, Bhiwandi stockyard

Grades in stock

Every grade, held for Thane

Pick the grade you have been specified. Each page carries the full specification, the size and weight chart and the local delivery position.

Fe 415 in Thane 415 MPa · 14.5% elong. Fe 415D in Thane 415 MPa · 18.0% elong. Fe 500 in Thane 500 MPa · 12.0% elong. Fe 500D in Thane 500 MPa · 16.0% elong. Fe 500S in Thane 500 (max 625) MPa · 18.0% elong. Fe 550 in Thane 550 MPa · 10.0% elong. Fe 550D in Thane 550 MPa · 14.5% elong. Fe 600 in Thane 600 MPa · 10.0% elong. Fe 500 CRS in Thane 500 MPa · 12.0% elong.

Local supply

Supplying Thane

Office and retail construction dominates here, which means larger pours, longer bars and a strong preference for a single supplier who can hold rate across a multi-month programme.

Bhiwandi to Thane runs are short enough that we despatch full 25 MT trailers and part loads on the same day, including direct-to-site unloading at Ghodbunder Road towers.

Active work in this belt includes Ghodbunder Road residential corridor, Thane–Borivali twin tunnel, Kalyan growth centre, Bhiwandi warehousing belt. If your site is on any of these, we have almost certainly delivered to the road outside it.

in the steel trade: 25 years
monthly despatch capacity: 12,000 MT
builder and developer sites supplied: 2,400+
cash discount on 100% advance: 1%

How TMT is made

Four stages, in order

The sequence is what gives the bar a hard surface and a ductile core. Skip a stage and you get a bar that either snaps or bends.

STAGE 01

Hot rolling

Billets are rolled down to the finished diameter at around 1,000 °C and leave the last stand still glowing.

STAGE 02

Quenching

The bar passes through a high-pressure water jacket. The outer skin hardens into martensite in a fraction of a second while the core stays hot.

STAGE 03

Self-tempering

Heat trapped in the core flows back outward and tempers that hardened rim into tough tempered martensite.

STAGE 04

Atmospheric cooling

On the cooling bed the core transforms slowly into ductile ferrite and pearlite. Hard outside, soft inside — that is the whole trick.

Areas we deliver to

BhiwandiTMT supplier KalyanTMT supplier DombivliTMT supplier AmbernathTMT supplier BadlapurTMT supplier UlhasnagarTMT supplier Ghodbunder RoadTMT supplier Wagle EstateTMT supplier MajiwadaTMT supplier KolshetTMT supplier MumbraTMT supplier ShahapurTMT supplier MurbadTMT supplier

Questions

Buying TMT in Thane

Which TMT grade should I use in Thane?

Thane is in Seismic Zone III. Fe 500D is the safe default for framed structures, Fe 550D where the design is optimised for steel saving, and CRS if the site is close to the sea. Send us the structural drawings and we will tell you what the BOQ actually needs.

How fast can you deliver to Thane?

Same day from Bhiwandi stockyard. Bhiwandi to Thane runs are short enough that we despatch full 25 MT trailers and part loads on the same day, including direct-to-site unloading at Ghodbunder Road towers.

Do you supply mill test certificates in Thane?

Yes, with every despatch, and the heat number matches the bundle tag.

What is the minimum order quantity?

Five tonnes for delivered loads. Below that you are welcome to lift from our stockyard directly, and we will still issue the mill test certificate.

How is the price fixed?

Basic rate per tonne, plus GST at 18%, plus freight to your site. We quote the three separately so you can see exactly what you are paying for.

What is rolling margin and why does it matter?

Rolling margin is the permitted variation between the theoretical and actual weight of a bar. IS 1786 allows up to 8% on small diameters. A supplier working at the loose end of that tolerance is quietly delivering less steel than your bar bending schedule assumed.

Which brands do you stock?

Primary mill material from the national brands, and secondary from audited regional rolling mills where the price gap is worth it and the test results hold up.