Maharashtra · Seismic Zone III

TMT Steel Bar Suppliers in Badlapur

Metal Ministry Inc holds every commercial grade of TMT reinforcement for Badlapur, Thane — Fe 500 through Fe 600 and corrosion resistant bar — with mill test certificates, verified weight and delivery scheduled around your pour programme.

Call +91 98921 71042 WhatsApp your BBS

Same DayLead time 5 MTMinimum order 12,000 MTMonthly capacity

TMT bar bundles in stock for Badlapur, Thane — Ready stock, Bhiwandi stockyard

Grades in stock

Every grade, held for Badlapur

Pick the grade you have been specified. Each page carries the full specification, the size and weight chart and the local delivery position.

Fe 415 in Badlapur 415 MPa · 14.5% elong. Fe 415D in Badlapur 415 MPa · 18.0% elong. Fe 500 in Badlapur 500 MPa · 12.0% elong. Fe 500D in Badlapur 500 MPa · 16.0% elong. Fe 500S in Badlapur 500 (max 625) MPa · 18.0% elong. Fe 550 in Badlapur 550 MPa · 10.0% elong. Fe 550D in Badlapur 550 MPa · 14.5% elong. Fe 600 in Badlapur 600 MPa · 10.0% elong. Fe 500 CRS in Badlapur 500 MPa · 12.0% elong.

Local supply

Supplying Badlapur, Thane

Township and layout construction here runs many buildings in parallel. Contractors typically block a monthly tonnage with us and draw against it, which keeps the rate stable through the programme.

Bhiwandi to Thane runs are short enough that we despatch full 25 MT trailers and part loads on the same day, including direct-to-site unloading at Ghodbunder Road towers.

Active work in this belt includes Ghodbunder Road residential corridor, Thane–Borivali twin tunnel, Kalyan growth centre, Bhiwandi warehousing belt. If your site is on any of these, we have almost certainly delivered to the road outside it.

in the steel trade: 25 years
monthly despatch capacity: 12,000 MT
builder and developer sites supplied: 2,400+
cash discount on 100% advance: 1%

How TMT is made

Four stages, in order

The sequence is what gives the bar a hard surface and a ductile core. Skip a stage and you get a bar that either snaps or bends.

STAGE 01

Hot rolling

Billets are rolled down to the finished diameter at around 1,000 °C and leave the last stand still glowing.

STAGE 02

Quenching

The bar passes through a high-pressure water jacket. The outer skin hardens into martensite in a fraction of a second while the core stays hot.

STAGE 03

Self-tempering

Heat trapped in the core flows back outward and tempers that hardened rim into tough tempered martensite.

STAGE 04

Atmospheric cooling

On the cooling bed the core transforms slowly into ductile ferrite and pearlite. Hard outside, soft inside — that is the whole trick.

Questions

Buying TMT in Badlapur

Which TMT grade should I use in Thane?

Thane is in Seismic Zone III. Fe 500D is the safe default for framed structures, Fe 550D where the design is optimised for steel saving, and CRS if the site is close to the sea. Send us the structural drawings and we will tell you what the BOQ actually needs.

How fast can you deliver to Badlapur, Thane?

Same day from Bhiwandi stockyard. Bhiwandi to Thane runs are short enough that we despatch full 25 MT trailers and part loads on the same day, including direct-to-site unloading at Ghodbunder Road towers.

Do you supply mill test certificates in Thane?

Yes, with every despatch, and the heat number matches the bundle tag.

Do you accept barter against flats or units?

Yes, from developers. Fifty per cent of the order is settled in cash and fifty per cent against ready units carrying an occupancy certificate, valued at 25 to 30 per cent below the prevailing market rate for that project, subject to title due diligence.

Do you supply mill test certificates?

Yes, with every despatch. The heat number on the certificate matches the tag on the bundle, so it survives an audit.

How long have you been in the steel business?

Twenty-five years, since 2000, supplying TMT and structural steel to builders, developers, contractors and infrastructure projects across India.

What is rolling margin and why does it matter?

Rolling margin is the permitted variation between the theoretical and actual weight of a bar. IS 1786 allows up to 8% on small diameters. A supplier working at the loose end of that tolerance is quietly delivering less steel than your bar bending schedule assumed.