Delhi NCR · Seismic Zone IV

TMT Steel Bar Suppliers in Noida

Metal Ministry Inc holds every commercial grade of TMT reinforcement for Noida — Fe 500 through Fe 600 and corrosion resistant bar — with mill test certificates, verified weight and delivery scheduled around your pour programme.

Call +91 98921 71042 WhatsApp your BBS

24 HoursLead time 5 MTMinimum order 12,000 MTMonthly capacity

TMT bar bundles in stock for Noida — Ready stock, Ghaziabad stock point

Grades in stock

Every grade, held for Noida

Pick the grade you have been specified. Each page carries the full specification, the size and weight chart and the local delivery position.

Fe 415 in Noida 415 MPa · 14.5% elong. Fe 415D in Noida 415 MPa · 18.0% elong. Fe 500 in Noida 500 MPa · 12.0% elong. Fe 500D in Noida 500 MPa · 16.0% elong. Fe 500S in Noida 500 (max 625) MPa · 18.0% elong. Fe 550 in Noida 550 MPa · 10.0% elong. Fe 550D in Noida 550 MPa · 14.5% elong. Fe 600 in Noida 600 MPa · 10.0% elong. Fe 500 CRS in Noida 500 MPa · 12.0% elong.

Local supply

Supplying Noida

Office and retail construction dominates here, which means larger pours, longer bars and a strong preference for a single supplier who can hold rate across a multi-month programme.

Short trailer runs from Ghaziabad, direct site unloading in the Noida Extension towers.

Active work in this belt includes Noida International Airport at Jewar, Noida Extension high-rise belt, Film City. If your site is on any of these, we have almost certainly delivered to the road outside it.

in the steel trade: 25 years
monthly despatch capacity: 12,000 MT
builder and developer sites supplied: 2,400+
cash discount on 100% advance: 1%

How TMT is made

Four stages, in order

The sequence is what gives the bar a hard surface and a ductile core. Skip a stage and you get a bar that either snaps or bends.

STAGE 01

Hot rolling

Billets are rolled down to the finished diameter at around 1,000 °C and leave the last stand still glowing.

STAGE 02

Quenching

The bar passes through a high-pressure water jacket. The outer skin hardens into martensite in a fraction of a second while the core stays hot.

STAGE 03

Self-tempering

Heat trapped in the core flows back outward and tempers that hardened rim into tough tempered martensite.

STAGE 04

Atmospheric cooling

On the cooling bed the core transforms slowly into ductile ferrite and pearlite. Hard outside, soft inside — that is the whole trick.

Questions

Buying TMT in Noida

Which TMT grade should I use in Noida?

Noida is in Seismic Zone IV. Fe 500D is the safe default for framed structures, Fe 550D where the design is optimised for steel saving, and CRS if the site is close to the sea. Send us the structural drawings and we will tell you what the BOQ actually needs.

How fast can you deliver to Noida?

24 hours from Ghaziabad stock point. Short trailer runs from Ghaziabad, direct site unloading in the Noida Extension towers.

Do you supply mill test certificates in Noida?

Yes, with every despatch, and the heat number matches the bundle tag.

Can we get the material tested by a third-party laboratory?

Yes. Samples are drawn in the presence of your engineer and sent to an independent NABL-accredited laboratory, and you are welcome to nominate the lab yourself. The mill test certificate comes with every load regardless.

Which brands do you stock?

Primary mill material from the national brands, and secondary from audited regional rolling mills where the price gap is worth it and the test results hold up.

Are you a stockist or a broker?

We are stockholders. Material sits in our own stockyards in our own name, which is why we can confirm despatch the same day for standing stock instead of waiting on a mill allocation.

Do you supply mill test certificates?

Yes, with every despatch. The heat number on the certificate matches the tag on the bundle, so it survives an audit.