Maharashtra · Seismic Zone III

TMT Steel Bar Suppliers in Bandra East

Metal Ministry Inc holds every commercial grade of TMT reinforcement for Bandra East, Mumbai — Fe 500 through Fe 600 and corrosion resistant bar — with mill test certificates, verified weight and delivery scheduled around your pour programme.

Call +91 98921 71042 WhatsApp your BBS

Same Day For Standing StockLead time 5 MTMinimum order 12,000 MTMonthly capacity

TMT bar bundles in stock for Bandra East, Mumbai — Ready stock, Kalamboli and Bhiwandi stockyards

Grades in stock

Every grade, held for Bandra East

Pick the grade you have been specified. Each page carries the full specification, the size and weight chart and the local delivery position.

Fe 415 in Bandra East 415 MPa · 14.5% elong. Fe 415D in Bandra East 415 MPa · 18.0% elong. Fe 500 in Bandra East 500 MPa · 12.0% elong. Fe 500D in Bandra East 500 MPa · 16.0% elong. Fe 500S in Bandra East 500 (max 625) MPa · 18.0% elong. Fe 550 in Bandra East 550 MPa · 10.0% elong. Fe 550D in Bandra East 550 MPa · 14.5% elong. Fe 600 in Bandra East 600 MPa · 10.0% elong. Fe 500 CRS in Bandra East 500 MPa · 12.0% elong.

Local supply

Supplying Bandra East, Mumbai

This is an active redevelopment belt. Sites are tight, storage space is limited and material has to arrive in sequence rather than in one drop, so we run staged deliveries against a schedule.

Trailer and 16-wheeler movement is restricted inside the island city between 07:00 and 11:00 and 17:00 and 22:00, so we schedule night despatch and break bulk at Bhiwandi for tight sites.

Active work in this belt includes Mumbai Coastal Road, MTHL Atal Setu approaches, Metro Line 2B and 9, SRA and cessed building redevelopment, Worli and Lower Parel high-rise cluster. If your site is on any of these, we have almost certainly delivered to the road outside it.

in the steel trade: 25 years
monthly despatch capacity: 12,000 MT
builder and developer sites supplied: 2,400+
cash discount on 100% advance: 1%

How TMT is made

Four stages, in order

The sequence is what gives the bar a hard surface and a ductile core. Skip a stage and you get a bar that either snaps or bends.

STAGE 01

Hot rolling

Billets are rolled down to the finished diameter at around 1,000 °C and leave the last stand still glowing.

STAGE 02

Quenching

The bar passes through a high-pressure water jacket. The outer skin hardens into martensite in a fraction of a second while the core stays hot.

STAGE 03

Self-tempering

Heat trapped in the core flows back outward and tempers that hardened rim into tough tempered martensite.

STAGE 04

Atmospheric cooling

On the cooling bed the core transforms slowly into ductile ferrite and pearlite. Hard outside, soft inside — that is the whole trick.

Questions

Buying TMT in Bandra East

Which TMT grade should I use in Mumbai?

Mumbai is in Seismic Zone III. Fe 500D is the safe default for framed structures, Fe 550D where the design is optimised for steel saving, and CRS if the site is close to the sea. Send us the structural drawings and we will tell you what the BOQ actually needs.

How fast can you deliver to Bandra East, Mumbai?

Same day for standing stock, 24 hours for mixed loads from Kalamboli and Bhiwandi stockyards. Trailer and 16-wheeler movement is restricted inside the island city between 07:00 and 11:00 and 17:00 and 22:00, so we schedule night despatch and break bulk at Bhiwandi for tight sites.

Do you supply mill test certificates in Mumbai?

Yes, with every despatch, and the heat number matches the bundle tag.

Do you supply mill test certificates?

Yes, with every despatch. The heat number on the certificate matches the tag on the bundle, so it survives an audit.

Do you accept barter against flats or units?

Yes, from developers. Fifty per cent of the order is settled in cash and fifty per cent against ready units carrying an occupancy certificate, valued at 25 to 30 per cent below the prevailing market rate for that project, subject to title due diligence.

Can we get the material tested by a third-party laboratory?

Yes. Samples are drawn in the presence of your engineer and sent to an independent NABL-accredited laboratory, and you are welcome to nominate the lab yourself. The mill test certificate comes with every load regardless.

How long have you been in the steel business?

Twenty-five years, since 2000, supplying TMT and structural steel to builders, developers, contractors and infrastructure projects across India.