Maharashtra · Seismic Zone III

TMT Steel Bar Suppliers in Murud

Metal Ministry Inc holds every commercial grade of TMT reinforcement for Murud, Raigad — Fe 500 through Fe 600 and corrosion resistant bar — with mill test certificates, verified weight and delivery scheduled around your pour programme.

Call +91 98921 71042 WhatsApp your BBS

24 HoursLead time 5 MTMinimum order 12,000 MTMonthly capacity

TMT bar bundles in stock for Murud, Raigad — Ready stock, Kalamboli stockyard

Grades in stock

Every grade, held for Murud

Pick the grade you have been specified. Each page carries the full specification, the size and weight chart and the local delivery position.

Fe 415 in Murud 415 MPa · 14.5% elong. Fe 415D in Murud 415 MPa · 18.0% elong. Fe 500 in Murud 500 MPa · 12.0% elong. Fe 500D in Murud 500 MPa · 16.0% elong. Fe 500S in Murud 500 (max 625) MPa · 18.0% elong. Fe 550 in Murud 550 MPa · 10.0% elong. Fe 550D in Murud 550 MPa · 14.5% elong. Fe 600 in Murud 600 MPa · 10.0% elong. Fe 500 CRS in Murud 500 MPa · 12.0% elong.

Local supply

Supplying Murud, Raigad

This is an active redevelopment belt. Sites are tight, storage space is limited and material has to arrive in sequence rather than in one drop, so we run staged deliveries against a schedule.

Alibaug, Pen and Khopoli are within a single-day trailer run from Kalamboli. Coastal sites are quoted in CRS by default.

Active work in this belt includes Alibaug second home and resort belt, MTHL Chirle landfall, Dighi Port, Khopoli industrial belt. If your site is on any of these, we have almost certainly delivered to the road outside it.

in the steel trade: 25 years
monthly despatch capacity: 12,000 MT
builder and developer sites supplied: 2,400+
cash discount on 100% advance: 1%

How TMT is made

Four stages, in order

The sequence is what gives the bar a hard surface and a ductile core. Skip a stage and you get a bar that either snaps or bends.

STAGE 01

Hot rolling

Billets are rolled down to the finished diameter at around 1,000 °C and leave the last stand still glowing.

STAGE 02

Quenching

The bar passes through a high-pressure water jacket. The outer skin hardens into martensite in a fraction of a second while the core stays hot.

STAGE 03

Self-tempering

Heat trapped in the core flows back outward and tempers that hardened rim into tough tempered martensite.

STAGE 04

Atmospheric cooling

On the cooling bed the core transforms slowly into ductile ferrite and pearlite. Hard outside, soft inside — that is the whole trick.

Questions

Buying TMT in Murud

Which TMT grade should I use in Raigad?

Raigad is in Seismic Zone III. Fe 500D is the safe default for framed structures, Fe 550D where the design is optimised for steel saving, and CRS if the site is close to the sea. Send us the structural drawings and we will tell you what the BOQ actually needs.

How fast can you deliver to Murud, Raigad?

24 hours from Kalamboli stockyard. Alibaug, Pen and Khopoli are within a single-day trailer run from Kalamboli. Coastal sites are quoted in CRS by default.

Do you supply mill test certificates in Raigad?

Yes, with every despatch, and the heat number matches the bundle tag.

Do you give a discount for advance payment?

Yes. Pay 100% of the invoice value before despatch and you get a flat 1% cash discount on the basic value, shown as a line on the tax invoice.

What is rolling margin and why does it matter?

Rolling margin is the permitted variation between the theoretical and actual weight of a bar. IS 1786 allows up to 8% on small diameters. A supplier working at the loose end of that tolerance is quietly delivering less steel than your bar bending schedule assumed.

What is the minimum order quantity?

Five tonnes for delivered loads. Below that you are welcome to lift from our stockyard directly, and we will still issue the mill test certificate.

Do you accept barter against flats or units?

Yes, from developers. Fifty per cent of the order is settled in cash and fifty per cent against ready units carrying an occupancy certificate, valued at 25 to 30 per cent below the prevailing market rate for that project, subject to title due diligence.