Maharashtra · Seismic Zone III

TMT Steel Bar Suppliers in Powai

Metal Ministry Inc holds every commercial grade of TMT reinforcement for Powai, Mumbai — Fe 500 through Fe 600 and corrosion resistant bar — with mill test certificates, verified weight and delivery scheduled around your pour programme.

Call +91 98921 71042 WhatsApp your BBS

Same Day For Standing StockLead time 5 MTMinimum order 12,000 MTMonthly capacity

TMT bar bundles in stock for Powai, Mumbai — Ready stock, Kalamboli and Bhiwandi stockyards

Grades in stock

Every grade, held for Powai

Pick the grade you have been specified. Each page carries the full specification, the size and weight chart and the local delivery position.

Fe 415 in Powai 415 MPa · 14.5% elong. Fe 415D in Powai 415 MPa · 18.0% elong. Fe 500 in Powai 500 MPa · 12.0% elong. Fe 500D in Powai 500 MPa · 16.0% elong. Fe 500S in Powai 500 (max 625) MPa · 18.0% elong. Fe 550 in Powai 550 MPa · 10.0% elong. Fe 550D in Powai 550 MPa · 14.5% elong. Fe 600 in Powai 600 MPa · 10.0% elong. Fe 500 CRS in Powai 500 MPa · 12.0% elong.

Local supply

Supplying Powai, Mumbai

Township and layout construction here runs many buildings in parallel. Contractors typically block a monthly tonnage with us and draw against it, which keeps the rate stable through the programme.

Trailer and 16-wheeler movement is restricted inside the island city between 07:00 and 11:00 and 17:00 and 22:00, so we schedule night despatch and break bulk at Bhiwandi for tight sites.

Active work in this belt includes Mumbai Coastal Road, MTHL Atal Setu approaches, Metro Line 2B and 9, SRA and cessed building redevelopment, Worli and Lower Parel high-rise cluster. If your site is on any of these, we have almost certainly delivered to the road outside it.

in the steel trade: 25 years
monthly despatch capacity: 12,000 MT
builder and developer sites supplied: 2,400+
cash discount on 100% advance: 1%

How TMT is made

Four stages, in order

The sequence is what gives the bar a hard surface and a ductile core. Skip a stage and you get a bar that either snaps or bends.

STAGE 01

Hot rolling

Billets are rolled down to the finished diameter at around 1,000 °C and leave the last stand still glowing.

STAGE 02

Quenching

The bar passes through a high-pressure water jacket. The outer skin hardens into martensite in a fraction of a second while the core stays hot.

STAGE 03

Self-tempering

Heat trapped in the core flows back outward and tempers that hardened rim into tough tempered martensite.

STAGE 04

Atmospheric cooling

On the cooling bed the core transforms slowly into ductile ferrite and pearlite. Hard outside, soft inside — that is the whole trick.

Questions

Buying TMT in Powai

Which TMT grade should I use in Mumbai?

Mumbai is in Seismic Zone III. Fe 500D is the safe default for framed structures, Fe 550D where the design is optimised for steel saving, and CRS if the site is close to the sea. Send us the structural drawings and we will tell you what the BOQ actually needs.

How fast can you deliver to Powai, Mumbai?

Same day for standing stock, 24 hours for mixed loads from Kalamboli and Bhiwandi stockyards. Trailer and 16-wheeler movement is restricted inside the island city between 07:00 and 11:00 and 17:00 and 22:00, so we schedule night despatch and break bulk at Bhiwandi for tight sites.

Do you supply mill test certificates in Mumbai?

Yes, with every despatch, and the heat number matches the bundle tag.

What is the minimum order quantity?

Five tonnes for delivered loads. Below that you are welcome to lift from our stockyard directly, and we will still issue the mill test certificate.

What happens if the material is rejected on site?

If your structural consultant rejects a consignment on test results, we lift it from site and replace it with fresh material at our cost. No restocking charge and no argument.

Do you supply TMT bars on credit?

The first five transactions run on 100% advance, each earning the 1% cash discount. After five clean transactions we review your offtake, GST returns and payment record and agree a credit line, typically 30 to 45 days against PDC or bank guarantee.

Which brands do you stock?

Primary mill material from the national brands, and secondary from audited regional rolling mills where the price gap is worth it and the test results hold up.