Maharashtra · Seismic Zone III

TMT Steel Bar Suppliers in Bhosari MIDC

Metal Ministry Inc holds every commercial grade of TMT reinforcement for Bhosari MIDC, Pune — Fe 500 through Fe 600 and corrosion resistant bar — with mill test certificates, verified weight and delivery scheduled around your pour programme.

Call +91 98921 71042 WhatsApp your BBS

24 HoursLead time 5 MTMinimum order 12,000 MTMonthly capacity

TMT bar bundles in stock for Bhosari MIDC, Pune — Ready stock, Chakan and Bhosari stock points

Grades in stock

Every grade, held for Bhosari MIDC

Pick the grade you have been specified. Each page carries the full specification, the size and weight chart and the local delivery position.

Fe 415 in Bhosari MIDC 415 MPa · 14.5% elong. Fe 415D in Bhosari MIDC 415 MPa · 18.0% elong. Fe 500 in Bhosari MIDC 500 MPa · 12.0% elong. Fe 500D in Bhosari MIDC 500 MPa · 16.0% elong. Fe 500S in Bhosari MIDC 500 (max 625) MPa · 18.0% elong. Fe 550 in Bhosari MIDC 550 MPa · 10.0% elong. Fe 550D in Bhosari MIDC 550 MPa · 14.5% elong. Fe 600 in Bhosari MIDC 600 MPa · 10.0% elong. Fe 500 CRS in Bhosari MIDC 500 MPa · 12.0% elong.

Local supply

Supplying Bhosari MIDC, Pune

Most of the demand here is industrial: pre-engineered building foundations, plant civil work, machine bases and warehouse floors. That means heavy diameters, tight delivery windows and clients who read the mill test certificate line by line.

Loads move up the expressway overnight from Kalamboli, or direct from our Chakan stock point for the northern industrial belt.

Active work in this belt includes Pune Metro Phase 2, Ring Road, Hinjewadi IT campuses, Chakan and Ranjangaon auto plants. If your site is on any of these, we have almost certainly delivered to the road outside it.

in the steel trade: 25 years
monthly despatch capacity: 12,000 MT
builder and developer sites supplied: 2,400+
cash discount on 100% advance: 1%

How TMT is made

Four stages, in order

The sequence is what gives the bar a hard surface and a ductile core. Skip a stage and you get a bar that either snaps or bends.

STAGE 01

Hot rolling

Billets are rolled down to the finished diameter at around 1,000 °C and leave the last stand still glowing.

STAGE 02

Quenching

The bar passes through a high-pressure water jacket. The outer skin hardens into martensite in a fraction of a second while the core stays hot.

STAGE 03

Self-tempering

Heat trapped in the core flows back outward and tempers that hardened rim into tough tempered martensite.

STAGE 04

Atmospheric cooling

On the cooling bed the core transforms slowly into ductile ferrite and pearlite. Hard outside, soft inside — that is the whole trick.

Questions

Buying TMT in Bhosari MIDC

Which TMT grade should I use in Pune?

Pune is in Seismic Zone III. Fe 500D is the safe default for framed structures, Fe 550D where the design is optimised for steel saving, and CRS if the site is close to the sea. Send us the structural drawings and we will tell you what the BOQ actually needs.

How fast can you deliver to Bhosari MIDC, Pune?

24 hours from Chakan and Bhosari stock points. Loads move up the expressway overnight from Kalamboli, or direct from our Chakan stock point for the northern industrial belt.

Do you supply mill test certificates in Pune?

Yes, with every despatch, and the heat number matches the bundle tag.

Do you accept barter against flats or units?

Yes, from developers. Fifty per cent of the order is settled in cash and fifty per cent against ready units carrying an occupancy certificate, valued at 25 to 30 per cent below the prevailing market rate for that project, subject to title due diligence.

What is rolling margin and why does it matter?

Rolling margin is the permitted variation between the theoretical and actual weight of a bar. IS 1786 allows up to 8% on small diameters. A supplier working at the loose end of that tolerance is quietly delivering less steel than your bar bending schedule assumed.

Do you give a discount for advance payment?

Yes. Pay 100% of the invoice value before despatch and you get a flat 1% cash discount on the basic value, shown as a line on the tax invoice.

How is the price fixed?

Basic rate per tonne, plus GST at 18%, plus freight to your site. We quote the three separately so you can see exactly what you are paying for.