Maharashtra · Seismic Zone III

TMT Steel Bar Suppliers in Wagholi

Metal Ministry Inc holds every commercial grade of TMT reinforcement for Wagholi, Pune — Fe 500 through Fe 600 and corrosion resistant bar — with mill test certificates, verified weight and delivery scheduled around your pour programme.

Call +91 98921 71042 WhatsApp your BBS

24 HoursLead time 5 MTMinimum order 12,000 MTMonthly capacity

TMT bar bundles in stock for Wagholi, Pune — Ready stock, Chakan and Bhosari stock points

Grades in stock

Every grade, held for Wagholi

Pick the grade you have been specified. Each page carries the full specification, the size and weight chart and the local delivery position.

Fe 415 in Wagholi 415 MPa · 14.5% elong. Fe 415D in Wagholi 415 MPa · 18.0% elong. Fe 500 in Wagholi 500 MPa · 12.0% elong. Fe 500D in Wagholi 500 MPa · 16.0% elong. Fe 500S in Wagholi 500 (max 625) MPa · 18.0% elong. Fe 550 in Wagholi 550 MPa · 10.0% elong. Fe 550D in Wagholi 550 MPa · 14.5% elong. Fe 600 in Wagholi 600 MPa · 10.0% elong. Fe 500 CRS in Wagholi 500 MPa · 12.0% elong.

Local supply

Supplying Wagholi, Pune

Township and layout construction here runs many buildings in parallel. Contractors typically block a monthly tonnage with us and draw against it, which keeps the rate stable through the programme.

Loads move up the expressway overnight from Kalamboli, or direct from our Chakan stock point for the northern industrial belt.

Active work in this belt includes Pune Metro Phase 2, Ring Road, Hinjewadi IT campuses, Chakan and Ranjangaon auto plants. If your site is on any of these, we have almost certainly delivered to the road outside it.

in the steel trade: 25 years
monthly despatch capacity: 12,000 MT
builder and developer sites supplied: 2,400+
cash discount on 100% advance: 1%

How TMT is made

Four stages, in order

The sequence is what gives the bar a hard surface and a ductile core. Skip a stage and you get a bar that either snaps or bends.

STAGE 01

Hot rolling

Billets are rolled down to the finished diameter at around 1,000 °C and leave the last stand still glowing.

STAGE 02

Quenching

The bar passes through a high-pressure water jacket. The outer skin hardens into martensite in a fraction of a second while the core stays hot.

STAGE 03

Self-tempering

Heat trapped in the core flows back outward and tempers that hardened rim into tough tempered martensite.

STAGE 04

Atmospheric cooling

On the cooling bed the core transforms slowly into ductile ferrite and pearlite. Hard outside, soft inside — that is the whole trick.

Questions

Buying TMT in Wagholi

Which TMT grade should I use in Pune?

Pune is in Seismic Zone III. Fe 500D is the safe default for framed structures, Fe 550D where the design is optimised for steel saving, and CRS if the site is close to the sea. Send us the structural drawings and we will tell you what the BOQ actually needs.

How fast can you deliver to Wagholi, Pune?

24 hours from Chakan and Bhosari stock points. Loads move up the expressway overnight from Kalamboli, or direct from our Chakan stock point for the northern industrial belt.

Do you supply mill test certificates in Pune?

Yes, with every despatch, and the heat number matches the bundle tag.

Do you supply mill test certificates?

Yes, with every despatch. The heat number on the certificate matches the tag on the bundle, so it survives an audit.

Can you deliver mixed diameters in one load?

Yes. Most of our loads are mixed. Tell us the schedule and we build the trailer to it.

Do you give a discount for advance payment?

Yes. Pay 100% of the invoice value before despatch and you get a flat 1% cash discount on the basic value, shown as a line on the tax invoice.

What happens if the material is rejected on site?

If your structural consultant rejects a consignment on test results, we lift it from site and replace it with fresh material at our cost. No restocking charge and no argument.