Maharashtra · Seismic Zone III

TMT Steel Bar Suppliers in Gangapur Road

Metal Ministry Inc holds every commercial grade of TMT reinforcement for Gangapur Road, Nashik — Fe 500 through Fe 600 and corrosion resistant bar — with mill test certificates, verified weight and delivery scheduled around your pour programme.

Call +91 98921 71042 WhatsApp your BBS

24 To 36 HoursLead time 5 MTMinimum order 12,000 MTMonthly capacity

TMT bar bundles in stock for Gangapur Road, Nashik — Ready stock, Satpur stock point

Grades in stock

Every grade, held for Gangapur Road

Pick the grade you have been specified. Each page carries the full specification, the size and weight chart and the local delivery position.

Fe 415 in Gangapur Road 415 MPa · 14.5% elong. Fe 415D in Gangapur Road 415 MPa · 18.0% elong. Fe 500 in Gangapur Road 500 MPa · 12.0% elong. Fe 500D in Gangapur Road 500 MPa · 16.0% elong. Fe 500S in Gangapur Road 500 (max 625) MPa · 18.0% elong. Fe 550 in Gangapur Road 550 MPa · 10.0% elong. Fe 550D in Gangapur Road 550 MPa · 14.5% elong. Fe 600 in Gangapur Road 600 MPa · 10.0% elong. Fe 500 CRS in Gangapur Road 500 MPa · 12.0% elong.

Local supply

Supplying Gangapur Road, Nashik

The work here is mostly residential towers, redevelopment and plot construction. Loads run to 8 mm, 10 mm, 12 mm and 16 mm, and site access is usually the deciding factor, so we send smaller trucks where a trailer cannot turn.

Direct trailer movement via NH-160 from Bhiwandi, with part loads consolidated twice a week for smaller sites.

Active work in this belt includes Samruddhi Mahamarg interchanges, Sinnar and Satpur MIDC expansion, Nashik smart city works. If your site is on any of these, we have almost certainly delivered to the road outside it.

in the steel trade: 25 years
monthly despatch capacity: 12,000 MT
builder and developer sites supplied: 2,400+
cash discount on 100% advance: 1%

How TMT is made

Four stages, in order

The sequence is what gives the bar a hard surface and a ductile core. Skip a stage and you get a bar that either snaps or bends.

STAGE 01

Hot rolling

Billets are rolled down to the finished diameter at around 1,000 °C and leave the last stand still glowing.

STAGE 02

Quenching

The bar passes through a high-pressure water jacket. The outer skin hardens into martensite in a fraction of a second while the core stays hot.

STAGE 03

Self-tempering

Heat trapped in the core flows back outward and tempers that hardened rim into tough tempered martensite.

STAGE 04

Atmospheric cooling

On the cooling bed the core transforms slowly into ductile ferrite and pearlite. Hard outside, soft inside — that is the whole trick.

Questions

Buying TMT in Gangapur Road

Which TMT grade should I use in Nashik?

Nashik is in Seismic Zone III. Fe 500D is the safe default for framed structures, Fe 550D where the design is optimised for steel saving, and CRS if the site is close to the sea. Send us the structural drawings and we will tell you what the BOQ actually needs.

How fast can you deliver to Gangapur Road, Nashik?

24 to 36 hours from Satpur stock point. Direct trailer movement via NH-160 from Bhiwandi, with part loads consolidated twice a week for smaller sites.

Do you supply mill test certificates in Nashik?

Yes, with every despatch, and the heat number matches the bundle tag.

What is the minimum order quantity?

Five tonnes for delivered loads. Below that you are welcome to lift from our stockyard directly, and we will still issue the mill test certificate.

Which brands do you stock?

Primary mill material from the national brands, and secondary from audited regional rolling mills where the price gap is worth it and the test results hold up.

Do you supply mill test certificates?

Yes, with every despatch. The heat number on the certificate matches the tag on the bundle, so it survives an audit.

Can you deliver mixed diameters in one load?

Yes. Most of our loads are mixed. Tell us the schedule and we build the trailer to it.